[OKI SEMICONDUCTOR Home]-[Site Map]
 
Part Number Operating Conditions ROM/RAM Ports *4 Description Packages OTP Development Support
System
Supply Voltage*1 Operating Frequency *2
(Max.)
Min. Cycle Time Supply Current *3
(Typ. @HALT)
Operating Temperature Range ROM
Capacity
RAM
Capacity
Input Output Input/
Output
8-bit
Timer
100Hz
Timer
WDT Serial Ports LD
Circuits *6
BC
Circuits *7
LCD
Driver *8
Interrupt Sources Internal/External Additional Functions
Synchronous UART/
Synchronous
ML63512A 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.4μA -20 to +70°C 4K X 16b 128 X 4b 4 4 24/28*5 2 - - - 1 2 - - 10/4 Comparator circuit
Melody circuit
48TQFP
64TQFP
- Dr.63514
MSM63182A 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.4μA -20 to +70°C 4K X 16b 384 X 4b 8 16 12 - 1 1 - - - 1 512 dots max.
32seg.x16com.
6/2 Buzzer circuit Chip
128QFP
MSM63P180*9 EASE63180
ML63514A 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.4μA -20 to +70°C 8K X 16b 256 X 4b 4 4 24/28*5 2 - - - 1 2 - - 10/4 Comparator circuit
Melody circuit
48TQFP
64TQFP
- Dr.63514
MSM63184A 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.4μA -20 to +70°C 8K X 16b 640 X 4b 8 16 20 - 1 1 1 - - 1 640 dots max.
40seg.x16com.
7/3 Buzzer circuit Chip
128QFP
MSM63P180*9 EASE63180
ML63611A 1.8V to 3.6V 700KHz 32.768KHz 2.9μs 61μs 0.45μA -20 to +70°C 8K X 16b 1024 X 4b 4 4 16 4 1 1 - 1 - 1 240 dots max.
60seg.x4com.
4/14 A/D Converter
(RC oscillation)
Melody circuit
Chip - Dr.63611
ML63187B 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.2μA -20 to +70°C 16K X 16b 1024 X 4b - - 8 4 1 1 1 - - 1 1024 dots max.
64seg.x16com.
12/2 Melody circuit Chip
128QFP
- EASE63180
MSM63188A 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.7μA -20 to +70°C 16K X 16b 3584 X 4b 8 24 24 4 1 1 1 - - 1 1024 dots max.
64seg.x16com.
13/4 Multiply/Divide circuit
Melody circuit
Chip
176LQFP
MSM63P180*9 EASE63180
ML63189B 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.2μA -20 to +70°C 32K X 16b 1536 X 4b 4 - 16 4 1 1 1 - - 1 1024 dots max.
64seg.x16com.
12/3 Melody circuit Chip
128QFP
- EASE63180
ML63295A 3.5V to 7.2V 2MHz 32.768KHz 1μs 61μs 4.0μA -20 to +70°C 32K X 16b 2048 X 4b 8 24 24 2 1 1 1 1 - 1 3072 dots max.
96seg.x32com.
12/5 Multiply/Divide circuit
Melody circuit
Chip
240QFP
- Dr.63295
ML63193 1.8V to 5.5V 2MHz 32.768KHz 1μs 61μs 2.6μA -20 to +70°C 64K X 16b 2048 X 4b 4 - 20 4 1 1 1 1 - 1 1024 dots max.
64seg.x16com.
14/4 Multiply/Divide circuit
Melody circuit
Chip
144LQFP
- EASE63180

*1:When the power backup(voltage multiplier)circuit is specified(requiring an external capacitor for the voltage multiplier), the power supply voltage of 0.9V to 2.7V(0.9V to 1.8V for ML63512A and ML63514A)is supported. When the LD circuit and comparator circuit are not in use, the power supply voltages of ML63512A and ML63514A are guaranteed for operation from 1.8V to 5.5V.
*2:Dual clocks(low-speed: 32.768 kHz crystal)are supported. RC oscillation can be selected as a mask option for the low-speed clocks of ML63512A, ML63514A, ML63187B, ML63189B, ML63193 and ML63295A.
*3:This is the typical value in the HALT mode(low-speed clock operation). The LCD drivers are in the power-down state in products with built-in LCD drivers.
*4:Interfaces with different power supplies are allowed.(A power supply pin dedicated to ports is provided separately from the logic power supply pin.)
*5:The number of ports varies, depending on the package used(48TQFP: 24, 64TQFP: 28).
*6: Level detector circuit: 12-level detection/channel. Channels can be switched by software.
*7:Battery check circuit: The judgment voltage values of ML63187B, ML63189B and ML63193 are 1.05V, 1.20V, 1.80V and 2.40V.The judgment voltage values of ML63295A are 4.50V and 5.10V. The judgment voltage values of MSM63182A, MSM63184A and MSM63188A are 1.05V, 1.30V, 2.20V and 2.80V.
*8:The bias generation circuit is included.
*9:The operating voltage range is different between mask products and OTP products. Prior to use, please check the specifications of each product.

 

Adobe ReaderAdobe "Acrobat Reader" is required to open PDF files.

Close this window.